| Brief description | Performs operations of cutting and slotting of workpieces using manual angle and straight grinding machines and stationary machines. |
|---|---|
| Category | Abrasive tools |
| Additional category | Cutting wheels on a bakelite bond |
| Bond | Bakelite bond |
| Profile | 41 |
| Outer diameter D, mm | 125 |
| Material | 54С |
| Thickness, mm | 1 |
| Internal diameter H, mm | 22,23 |
|
Grain it FEPA
F10-F22 Roughing operations with large depth of cut, cleaning of workpieces, castings. Processing materials that cause clogging of the wheel surface (brass, copper, aluminum). F22-F36 Cutting off, flat grinding with the end of a wheel, sharpening cutters, dressing abrasive tools. F30-F60 Preliminary and combined grinding, sharpening of cutting tools. F40-F220 Surface grinding. F54-F90 Finish grinding, processing of profile surfaces, sharpening of small tools, grinding of brittle materials. F100-F180 Finishing grinding, finishing of hard alloys, finishing of cutting tools, steel workpieces, sharpening of thin blades, preliminary honing. F180-F280 Finishing grinding of metals, glass, marble, etc., thread grinding, fine honing. F230-F600 Superfinishing, final honing, finishing of thin blades, fine thread grinding of products, polishing. |
F60 |
| Angle cutting speed | 80 |
In the case of the end of certain types of abrasive tools in stock, we can produce the required quantity to order.
Performs operations of cutting and slotting of workpieces using manual angle and straight grinding machines and stationary machines.
Cutting and cleaning wheels for abrasive processing of metals, alloys, wood, natural leather and other materials with or without the use of lubricating and cooling fluids.
PJSC "Zaporizhsky Abrasive Combine" (JSC) produces cut-off and grinding wheels on a bakelite bond with reinforced elements. For the safe operation of the wheels when working at a speed of 80 m/s, the wheels are reinforced with glass mesh reinforcement.
Cutting and grinding wheels are manufactured on modern Italian equipment. JSC manufactures cutting and grinding wheels from materials of its own production: electrocorundum of normal grade 14A and silicon carbide of black grade 54C. Modern phenol-formaldehyde resins from leading European manufacturers are used as a binder during the manufacture of wheels.
To increase the accuracy of the landing hole, the wheels are calibrated with a metal sleeve. The end surface of ZAK cutting and grinding wheels is made hard and grooved.
This lowers the temperature in the cutting zone and reduces power consumption by 60-80% compared to smooth surface wheels, and also ensures spring-free cutting. Springless cutting does not cause overheating and changes in the metal structure at the cutting site.
Abrasive cutting and deburring is one of the most productive types of blanking and surface treatment operations.
The use of cutting and grinding wheels requires less time and causes less material consumption than other methods of cutting and cleaning.
High productivity, the exception of deformations and burns, simplicity of the equipment, contribute to the wide application of cutting and grinding wheels.
Cutting and grinding wheels produced by PJSC "Zaporosheny Abrasivny Kombinat" are intended for use in metallurgy and mechanical engineering, in construction and in everyday life.
Усі стандартні замовлення на доставку обробляє GLS, за винятком Німеччини, яку обробляє DHL. 2–5 робочих днів
Усю експрес-доставку обробляє DHL. Будь-де в ЄС: 1–2 робочих дні
Гарантія 12 місяців
